Fruit box line
XD-Z05
A configurable automatic line for three-piece fruit and vegetable boxes. Layout, installed power and footprint are specified for the project.
*Catalogue specification; box sample confirmation required.
MACHINE FEATURES
The XD-Z05 is designed for the packaging operations described below. Compare its working dimensions and features with your box drawing and production requirements.
This configuration assembles a box from separate cardboard pieces. Send drawings for every piece, together with the assembled sample, so the feed arrangement, joining positions and finished structure can be reviewed.
The line combines forming with the conveying or assembly stages specified for the project. Agree the sequence, transfer positions and floor layout before ordering, including the connection to any existing equipment.
The feed system supplies blanks to the forming cycle. Blank size, stiffness and stack condition affect feeding; use production samples to check pickup and positioning over repeated cycles.
The line combines forming with the conveying or assembly stages specified for the project. Agree the sequence, transfer positions and floor layout before ordering, including the connection to any existing equipment.
TECHNICAL DATA
Confirm the machine configuration against your carton sample, required output and site power supply.
Confirm your configuration| Catalogue speed | 1,500–1,800 boxes / hour |
|---|---|
| Cardboard thickness | 1.5–5 mm |
| Finished box length | 220–400 mm |
| Finished box width | 180–380 mm |
| Finished box height | 70–250 mm |
| Catalogue electrical supply | 380 V / 50 Hz |
| Total power | Project-specific configuration |
| Air pressure | 0.6–0.7 MPa |
| Machine net weight | Project-specific configuration |
| Machine dimensions | Project-specific layout |
Figures are from the 2025 Xunding catalogue. Actual output depends on box design, cardboard and configuration. Confirm the current specification, electrical supply and box sample before ordering.
BOX REQUIREMENTS
Share the drawing, dimensions and board specification.
The catalogue range is a starting point, not a fit guarantee.
Finished dimensions, blank drawing and a photo of the assembled box.
Cardboard type and thickness, and any printing or coating requirements.
Required boxes per hour, shift pattern and available space on the packing line.
Installation country, site electrical supply and commissioning requirements.
Review the box drawing and material against this model’s catalogue specification.
Box design exampleCATALOGUE BOX STRUCTURE
A three-piece box uses separate cardboard components joined during assembly. It needs a different feed and joining arrangement from a tray folded from one blank. The Xunding range includes dedicated three-piece forming equipment.
View box requirements & modelsFREQUENTLY ASKED QUESTIONS
Send the finished-box dimensions, the flat blank drawing and cardboard thickness. Xunding must confirm the exact box structure and configuration; dimensions alone do not establish compatibility.
The catalogue output is 1,500–1,800 boxes per hour. Production speed depends on the carton design, material and machine settings. Send a box sample to discuss the expected output.
The catalogue lists 380 V / 50 Hz. Tell us your site voltage, phase and frequency before requesting a quote. Suitability and any required changes need confirmation for the installation site.
Include the XD-Z05 model reference, box dimensions, board thickness, required output and destination. If you do not have a final drawing, describe the packaging you are working on.
REQUEST A QUOTATION
Tell us your box dimensions, cardboard and production target.
