Mailer boxes
XD-Z10
An automatic folding mailer-box machine with chain-positioned motion and continuous feeding for cardboard retail and product packaging.
*Catalogue specification; box sample confirmation required.
MACHINE FEATURES
The XD-Z10 is designed for the packaging operations described below. Compare its working dimensions and features with your box drawing and production requirements.
Vacuum suction picks up the cardboard blank for feeding into the machine. During a sample trial, check that the board separates cleanly and enters in the correct position, especially when blanks are warped or vary in thickness.
Servo-controlled motion is used in the forming process. Review the sequence with your box sample and confirm the settings and adjustments required when moving to another box size.
The machine uses a control panel to operate its production cycle. Review the controls with the operator, including starting, stopping and the settings supplied for the ordered configuration.
Blanks move through successive positions in the folding and forming process. Review how the box is held and transferred at each stage, with particular attention to corners, joints and the discharge arrangement.
TECHNICAL DATA
Confirm the machine configuration against your carton sample, required output and site power supply.
Confirm your configuration| Catalogue speed | 1,200–1,800 boxes / hour |
|---|---|
| Cardboard thickness | 1.5–3 mm |
| Finished box length | 200–600 mm |
| Finished box width | 120–360 mm |
| Finished box height | 25–130 mm |
| Catalogue electrical supply | 220 V / 50 Hz |
| Total power | 2 kW |
| Air pressure | 0.6–0.7 MPa |
| Machine net weight | Approx. 800 kg |
| Machine dimensions | 3,730 × 1,300 × 2,260 mm |
Figures are from the 2025 Xunding catalogue. Actual output depends on box design, cardboard and configuration. Confirm the current specification, electrical supply and box sample before ordering.
BOX REQUIREMENTS
Share the drawing, dimensions and board specification.
The catalogue range is a starting point, not a fit guarantee.
Finished dimensions, blank drawing and a photo of the assembled box.
Cardboard type and thickness, and any printing or coating requirements.
Required boxes per hour, shift pattern and available space on the packing line.
Installation country, site electrical supply and commissioning requirements.
Review the box drawing and material against this model’s catalogue specification.
Box design exampleCATALOGUE BOX STRUCTURE
A mailer has a lid attached to the body and folded side sections. Its tabs, lid and corner folds determine the forming sequence. Printed board can be used, but print quality comes from the supplied blank.
View box requirements & modelsFREQUENTLY ASKED QUESTIONS
Send the finished-box dimensions, the flat blank drawing and cardboard thickness. Xunding must confirm the exact box structure and configuration; dimensions alone do not establish compatibility.
The catalogue output is 1,200–1,800 boxes per hour. Production speed depends on the carton design, material and machine settings. Send a box sample to discuss the expected output.
The catalogue lists 220 V / 50 Hz. Tell us your site voltage, phase and frequency before requesting a quote. Suitability and any required changes need confirmation for the installation site.
Include the XD-Z10 model reference, box dimensions, board thickness, required output and destination. If you do not have a final drawing, describe the packaging you are working on.
REQUEST A QUOTATION
Tell us your box dimensions, cardboard and production target.
