Mailer boxes
XD-Z12
A configurable mailer-box assembly line for clothing, crafts, daily goods and electronics packaging. Confirm the blank structure and line arrangement with Xunding.
*Catalogue specification; box sample confirmation required.
MACHINE FEATURES
The XD-Z12 is designed for the packaging operations described below. Compare its working dimensions and features with your box drawing and production requirements.
The feed system supplies blanks to the forming cycle. Blank size, stiffness and stack condition affect feeding; use production samples to check pickup and positioning over repeated cycles.
Blanks move through successive positions in the folding and forming process. Review how the box is held and transferred at each stage, with particular attention to corners, joints and the discharge arrangement.
The controller coordinates movement through the machine; models listing photoelectric tracking also use sensors to track the process. Check the feed and forming sequence during a sample run, including how the machine handles a misplaced blank.
The line combines forming with the conveying or assembly stages specified for the project. Agree the sequence, transfer positions and floor layout before ordering, including the connection to any existing equipment.
TECHNICAL DATA
Confirm the machine configuration against your carton sample, required output and site power supply.
Confirm your configuration| Catalogue speed | 1,200–1,800 boxes / hour |
|---|---|
| Cardboard thickness | 1.5–3 mm |
| Finished box length | 200–600 mm |
| Finished box width | 120–600 mm |
| Finished box height | 25–130 mm |
| Catalogue electrical supply | 220 V / 50 Hz |
| Total power | Project-specific configuration |
| Air pressure | 0.6–0.7 MPa |
| Machine net weight | Project-specific configuration |
| Machine dimensions | Project-specific layout |
Figures are from the 2025 Xunding catalogue. Actual output depends on box design, cardboard and configuration. Confirm the current specification, electrical supply and box sample before ordering.
BOX REQUIREMENTS
Share the drawing, dimensions and board specification.
The catalogue range is a starting point, not a fit guarantee.
Finished dimensions, blank drawing and a photo of the assembled box.
Cardboard type and thickness, and any printing or coating requirements.
Required boxes per hour, shift pattern and available space on the packing line.
Installation country, site electrical supply and commissioning requirements.
Review the box drawing and material against this model’s catalogue specification.
Box design exampleCATALOGUE BOX STRUCTURE
A mailer has a lid attached to the body and folded side sections. Its tabs, lid and corner folds determine the forming sequence. Printed board can be used, but print quality comes from the supplied blank.
View box requirements & modelsFREQUENTLY ASKED QUESTIONS
Send the finished-box dimensions, the flat blank drawing and cardboard thickness. Xunding must confirm the exact box structure and configuration; dimensions alone do not establish compatibility.
The catalogue output is 1,200–1,800 boxes per hour. Production speed depends on the carton design, material and machine settings. Send a box sample to discuss the expected output.
The catalogue lists 220 V / 50 Hz. Tell us your site voltage, phase and frequency before requesting a quote. Suitability and any required changes need confirmation for the installation site.
Include the XD-Z12 model reference, box dimensions, board thickness, required output and destination. If you do not have a final drawing, describe the packaging you are working on.
REQUEST A QUOTATION
Tell us your box dimensions, cardboard and production target.
