Shoe & lid-and-base boxes
XD-Z13
Forms cardboard boxes with an integrated hinged lid for footwear, clothing and general product packaging, using hot-melt glue and automatic folding.
*Catalogue specification; box sample confirmation required.
MACHINE FEATURES
The XD-Z13 is designed for the packaging operations described below. Compare its working dimensions and features with your box drawing and production requirements.
Hot-melt adhesive joins the folded sections of the box. The glue locations need to match the blank and joint design. Review the adhesive requirement, nozzle arrangement and finished joints using your production material.
The machine feeds the blank and folds its edges as part of the forming cycle. Check the crease lines, edge overlap and corner arrangement against the tooling with the board you intend to use.
Photoelectric sensors track the production process. Ask to see the sensor positions and the response to an incorrectly positioned blank during the equipment review; the response depends on the ordered configuration.
The catalogue describes stored settings for mould adjustment. Review how the operator saves and recalls a box setup, then check the physical tooling and formed samples after changing sizes.
TECHNICAL DATA
Confirm the machine configuration against your carton sample, required output and site power supply.
Confirm your configuration| Catalogue speed | 2,400–3,300 boxes / hour |
|---|---|
| Cardboard thickness | 1.5–3 mm |
| Finished box length | 165–380 mm |
| Finished box width | 100–280 mm |
| Finished box height | 70–125 mm |
| Catalogue electrical supply | 380 V / 50 Hz |
| Total power | 12 kW |
| Air pressure | 0.6–0.7 MPa |
| Machine net weight | 2,500 kg |
| Machine dimensions | 4,150 × 2,550 × 2,800 mm |
Figures are from the 2025 Xunding catalogue. Actual output depends on box design, cardboard and configuration. Confirm the current specification, electrical supply and box sample before ordering.
BOX REQUIREMENTS
Share the drawing, dimensions and board specification.
The catalogue range is a starting point, not a fit guarantee.
Finished dimensions, blank drawing and a photo of the assembled box.
Cardboard type and thickness, and any printing or coating requirements.
Required boxes per hour, shift pattern and available space on the packing line.
Installation country, site electrical supply and commissioning requirements.
Review the box drawing and material against this model’s catalogue specification.
Box design exampleCATALOGUE BOX STRUCTURE
The lid remains connected to the base. Box depth, lid position and edge folds affect the tooling and closing operation. Xunding lists hinged-lid shoe-box equipment separately from the fruit tray range.
View box requirements & modelsFREQUENTLY ASKED QUESTIONS
Send the finished-box dimensions, the flat blank drawing and cardboard thickness. Xunding must confirm the exact box structure and configuration; dimensions alone do not establish compatibility.
The catalogue output is 2,400–3,300 boxes per hour. Production speed depends on the carton design, material and machine settings. Send a box sample to discuss the expected output.
The catalogue lists 380 V / 50 Hz. Tell us your site voltage, phase and frequency before requesting a quote. Suitability and any required changes need confirmation for the installation site.
Include the XD-Z13 model reference, box dimensions, board thickness, required output and destination. If you do not have a final drawing, describe the packaging you are working on.
REQUEST A QUOTATION
Tell us your box dimensions, cardboard and production target.
