The words corrugated box machine and carton folder gluer can describe different production tasks. The quickest way to narrow the enquiry is to show the blank, specify the board and explain what should come out of the machine.
Carton board and corrugated board
An automatic carton board folder gluer machine enquiry may concern die-cut carton board folded and glued along a seam. A corrugated-box enquiry may involve thicker material formed into an upright tray. The material name matters, but the blank and box structure matter as well.
Tell the supplier whether the board is solid carton board or corrugated material. Include thickness, the proposed box design and any printing or coating. Do not assume that equipment for one board construction will handle the other simply because both finished products are called cartons.
Flat glued carton or upright formed box?
An automatic carton folder gluer machine may be required to deliver glued cartons for a later packing operation. Tray-forming equipment can instead be used to produce open boxes ready for filling. These outputs are not interchangeable: they change the forming process and the work that follows it.
Some designs use one blank, while three-piece trays use separate components. Show the inlet material and the desired outlet box in your enquiry. This is particularly useful when different suppliers use similar machine names for different equipment.
High-speed corrugated folding and gluing
For an automatic high-speed corrugated paper box folding and gluing machine, define speed in terms of usable boxes from your own blank. Give the target boxes per hour and the required shift pattern. Ask which box and material will be used when output is demonstrated.
The Xunding catalogue lists XD-Z06 for 1.5–7 mm board and 1,500–2,500 boxes per hour. That range is a reference for this model, not a promise for every corrugated blank. It should not be compared directly with another machine’s transport speed in metres per minute without knowing the box dimensions and process.
Choose by the sample, then review the configuration
A drawing, production board sample and finished box give the supplier a basis for checking compatibility. Include glued corners, lid arrangements, tabs and any separate parts. If several boxes are planned, list them individually rather than describing only the largest size.
Compare the forming task with the Xunding catalogue and ask for a configuration review. A fruit tray former, a mailer-box machine and a straight-line folder-gluer should not be treated as the same equipment. Confirm the exact structure, outlet condition and material before placing an order.
Catalogue models to discuss
These models are starting points for an enquiry. Confirm the configuration against your blank and sample.
- XD-Z06 · Automatic fruit box forming machine
Fruit and vegetable box forming with vacuum feeding, PLC control and automatic stacking. The catalogue lists cardboard up to 7 mm thick.
- XD-Z04 · Three-piece fruit box forming machine
Forms three-piece fruit and vegetable boxes from separate cardboard parts, with automatic feeding and touchscreen mould settings.
- XD-09 · Automatic mailer box forming machine
Automatic forming for folding mailer boxes, described as aircraft boxes in the catalogue, for clothing, crafts, electronics and general product packaging.