Fruit tray forming machines
XD-Z06
Fruit and vegetable box forming with vacuum feeding, PLC control and automatic stacking. The catalogue lists cardboard up to 7 mm thick.
| Catalogue speed | 1,500–1,800 boxes / hour |
|---|---|
| Cardboard thickness | 1.5–7 mm |
| Catalogue electrical supply | 380 V / 50 Hz |
| Total power | 12 kW total; approx. 5 kW in normal production |
| Air pressure | 0.6–0.7 MPa |
| Machine net weight | Approx. 2,300 kg |
| Machine dimensions | 5,200 × 4,315 × 2,600 mm |
| Catalogue noise level | ≤100 dB |
| Cardboard stack height | 1,200 mm |
| Stack load | 100 kg |
| Glue tank capacity | 8 L / 10 L |
| Air consumption | 380 L/min |
Figures are from the 2025 Xunding catalogue. Actual output depends on box design, cardboard and configuration. Confirm the current specification, electrical supply and box sample before ordering.
Produces cardboard outer packaging for food, fruit and vegetables, with automatic feeding, gluing, folding and forming. The finished structure is selected to match the blank and mould.
*Catalogue specification; box sample confirmation required.
MACHINE FEATURES
The XD-Z06 is designed for the packaging operations described below. Compare its working dimensions and features with your box drawing and production requirements.
The glue-spray system includes automatic compensation during the gluing cycle.
Vacuum-suction feeding, edge folding, edge pressing, tab folding and forming run in one continuous process.
PLC control works with photoelectric tracking, air-supply detection and a touchscreen operator interface.
Automatic cardboard positioning before and after gluing helps reduce photoelectric positioning errors.
An infrared protection system is listed in the catalogue for the machine operating area.
Automatic fault diagnosis and a quick mould-adjustment device are included in the catalogue description.
Formed boxes are conveyed to the stacking section after the folding and forming operations.
The cage-style frame uses integral machining and grouped assemblies for the machine structure.
BOX REQUIREMENTS
Finished dimensions and flat blank dimensions are listed separately.
All dimensions are in millimetres.
| Finished box length L | 220–680 mm |
|---|---|
| Finished box width W | 220–680 mm |
| Finished box height H | 70–250 mm |
| Flat blank dimension A | 480–1,000 mm |
| Flat blank dimension B | 480–1,300 mm |
| Cardboard thickness | 1.5–7 mm |
A and B refer to the flat blank; L, W and H refer to the finished box. Use the drawing to identify each dimension. Size ranges do not mean that every combination of dimensions is suitable.
Review the box drawing and material against this model’s catalogue specification.
Box design examplePRODUCE PACKAGING
An open tray keeps produce accessible during packing. The samples include printed and plain board, with different wall heights and hand-hole positions. The crop name on the print does not determine the forming process.
View box requirements & models
Box design examplePRODUCE PACKAGING
Folded corner sections change how a tray is formed and joined. The sample collection shows several corner arrangements. A forming setup needs to match the folds and overlaps, even when two trays share the same outside dimensions.
View box requirements & modelsFREQUENTLY ASKED QUESTIONS
Send the finished-box dimensions, the flat blank drawing and cardboard thickness. Xunding must confirm the exact box structure and configuration; dimensions alone do not establish compatibility.
The catalogue output is 1,500–1,800 boxes per hour. Production speed depends on the carton design, material and machine settings. Send a box sample to discuss the expected output.
The catalogue lists 380 V / 50 Hz. Tell us your site voltage, phase and frequency before requesting a quote. Suitability and any required changes need confirmation for the installation site.
Include the XD-Z06 model reference, box dimensions, board thickness, required output and destination. If you do not have a final drawing, describe the packaging you are working on.
MACHINE GUIDES
Machine selection
Compare box structures and fruit tray machine ranges. Use formed and flat box views, dimensions and daily output to discuss a suitable configuration.
Machine selection
Send a formed box photo and a flat blank photo or die-cut drawing to identify a machine model. Add dimensions and daily output to refine the setup.
Sample trials & quality
Plan a box forming sample trial around your blank, board, finished-box checks, accepted output and changeovers. Download a project checklist.
