Shoe & lid-and-base box machines
XD-Z13
Forms cardboard boxes with an integrated hinged lid for footwear, clothing and general product packaging, using hot-melt glue and automatic folding.
| Catalogue speed | 2,400–3,300 boxes / hour |
|---|---|
| Cardboard thickness | 1.5–3 mm |
| Catalogue electrical supply | 380 V / 50 Hz |
| Total power | 12 kW |
| Air pressure | 0.6–0.7 MPa |
| Machine net weight | 2,500 kg |
| Machine dimensions | 4,150 × 2,550 × 2,800 mm |
| Catalogue noise level | ≤80 dB |
| Cardboard stack height | 800 mm |
| Stack load | 150 kg |
| Glue tank capacity | 8 L / 10 L |
| Air consumption | 380 L/min |
Figures are from the 2025 Xunding catalogue. Actual output depends on box design, cardboard and configuration. Confirm the current specification, electrical supply and box sample before ordering.
Produces boxes with an integrated hinged lid for footwear, clothing, crafts, daily goods, electronics, electrical products, hardware and standard parts.
*Catalogue specification; box sample confirmation required.
MACHINE FEATURES
The XD-Z13 is designed for the packaging operations described below. Compare its working dimensions and features with your box drawing and production requirements.
A hot-melt adhesive spray system applies glue during the cardboard forming sequence.
Cardboard feeding, edge wrapping, tab folding and forming are completed in one continuous operation.
Motion control, photoelectric tracking, air-supply detection and a touchscreen interface coordinate the forming process.
The catalogue lists infrared protection for the machine operating area.
Automatic fault diagnosis is included in the machine control functions.
Quick mould adjustment uses numerical control with a memory function for stored settings.
The machine includes an automatic cover-closing function after the box-forming operation.
A circulating material-change function supports the cardboard-feeding process.
The machine uses a cage-style, integrally machined frame assembled from grouped structural sections.
BOX REQUIREMENTS
Finished dimensions and flat blank dimensions are listed separately.
All dimensions are in millimetres.
| Finished box length L | 165–380 mm |
|---|---|
| Finished box width W | 100–280 mm |
| Finished box height H | 70–125 mm |
| Flat blank dimension A | 345–710 mm |
| Flat blank dimension B | 470–945 mm |
| Lid dimension K | 30–125 mm |
| Inside fold edge R | 20–40 mm |
| Cardboard thickness | 1.5–3 mm |
A and B refer to the flat blank; L, W and H refer to the finished box. Use the drawing to identify each dimension. Size ranges do not mean that every combination of dimensions is suitable.
Review the box drawing and material against this model’s catalogue specification.
Box design exampleCATALOGUE BOX STRUCTURE
The lid remains connected to the base. Box depth, lid position and edge folds affect the tooling and closing operation. Xunding lists hinged-lid shoe-box equipment separately from the fruit tray range.
View box requirements & modelsFREQUENTLY ASKED QUESTIONS
Send the finished-box dimensions, the flat blank drawing and cardboard thickness. Xunding must confirm the exact box structure and configuration; dimensions alone do not establish compatibility.
The catalogue output is 2,400–3,300 boxes per hour. Production speed depends on the carton design, material and machine settings. Send a box sample to discuss the expected output.
The catalogue lists 380 V / 50 Hz. Tell us your site voltage, phase and frequency before requesting a quote. Suitability and any required changes need confirmation for the installation site.
Include the XD-Z13 model reference, box dimensions, board thickness, required output and destination. If you do not have a final drawing, describe the packaging you are working on.
MACHINE GUIDES
Machine selection
Compare box structures and fruit tray machine ranges. Use formed and flat box views, dimensions and daily output to discuss a suitable configuration.
Machine selection
Send a formed box photo and a flat blank photo or die-cut drawing to identify a machine model. Add dimensions and daily output to refine the setup.
Sample trials & quality
Plan a box forming sample trial around your blank, board, finished-box checks, accepted output and changeovers. Download a project checklist.
